ラズパイセットアップのコマンド群

ラズパイセットアップのコマンド群

はじめに

これらの作業はすべてSSHで行う。fingなどを使ってIPアドレスを調べる。

$ ssh pi@192.168.11.13

更新

$ sudo apt-get update
$ sudo apt-get upgrade

$ sudo rpi-update

$ sudo raspi-config
  • Expand Filesystem
  • Internationalisation Options
    • Change Locale
    • Change Timezone
    • Change Keyboard Layout
    • Change WiFi Country
  • Advanced Options
    • Change Hostname

必要なパッケージのインストール

$ sudo apt-get install -y vim tmux zsh git

ルートパスワードの変更

$ sudo passwd root

IPアドレスの固定化

静的IPの設定

あらかじめルーターの管理画面で、192.168.11.2をDHCPの割り当て範囲から外しておく。

$ sudo vim /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

#iface eth0 inet manual
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.11.2
netmask 255.255.255.0
gateway 192.168.11.1
dns-nameservers 8.8.8.8 192.168.11.1

allow-hotplug wlan0
iface wlan0 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
	wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

再起動

$ sudo reboot

使用ユーザーの作成

ユーザーを新規作成

$ sudo adduser hoge
$ sudo gpasswd -a hoge sudo

ホームディレクトリがなければ作る

$ sudo ls -l /home
$ sudo mkdir /home/hoge
$ sudo chown hoge /home/hoge
$ sudo chgrp hoge /home/hoge

デフォルトシェルの変更

$ sudo vim /etc/passwd
- hoge:x:1001:1001:,,,:/home/hoge:/bin/bash
+ hoge:x:1001:1001:,,,:/home/hoge:/bin/zsh

ログイン

$ su hoge

ユーザーpiの削除

$ sudo userdel -r pi

公開鍵認証

クライアント上

必要があれば鍵の作成

$ cd .ssh
$ ssh-keygen -t ecdsa -C "foo"

公開鍵の送信

$ scp ~/.ssh/id_ecdsa.pub hoge@192.168.11.2:

ホスト上

受け取った公開鍵の登録

$ mkdir ~/.ssh
$ cat ~/id_ecdsa.pub >> ~/.ssh/authorized_keys

接続方法

$ ssh hoge@192.168.11.2 -p 22 -i ~/.ssh/id_ecdsa

SSHポートの変更、パスワード認証の禁止

$ sudo vim /etc/ssh/sshd_config
- Port 22
+ Port 22222

- #PasswordAuthentication yes
+ PasswordAuthentication no